Easydis Base V44 V10

• MediaFire 619.45MB • MediaFire 1.48GB *EDIT 7 May 2018: OK, thank you everyone who left a comment, I am glad so many people have found this guide helpful. Due to the high volume of traffic and unreliability of the DropBox links, I have finally added the files to MediaFire and Google Drive. NEW USERS: This is a guide on how to install DIS using the instructions that come in the.zip files, not a detailed guide.

The complete procedure to install DIS is quite complicated and has so many variations that will end up with it not working or need the whole thing installing again to change, so follow through them as per the guide below and you should get it going, as many others have. Read the troubleshooting section at the bottom, particularly the first part.

Dec 20, 2016  Thanks KaiO for your response. Of course it's a E64--just wanted to see if anyone was paying attention!;) What is the best way to obtain the latest version of the ISTA software?

The Windows install on some laptops simply will not work with the virtual networking needed to set DIS up and/or routing of the COM ports, yet another laptop running the same Windows version will work fine. If you find yourself unable to complete the installation or connect the hardware as shown below after a few tries, switch to another laptop or do a fresh install of Windows. Installation procedure that worked for me: [ Obviously refer to the installation guides / videos for detailed instructions.] • Disable Windows Firewall and Anti Virus. • Install drivers for your USB-OBD cable and USB-serial adapter, making sure it is set as port COM1.

• Install / update INPA / EDIABAS, using ADS interface, not OBD. • Change environment path in Windows to c:/ediabas/bin. • Install ADS Setup. • Install OBD setup. • Edit ediabas.ini, change remote-host and port. • Install VM Ware [version 5.5 or higher].

• Edit VM Ware network bridge in network editor. • Set up the new virtual machine with ethernet set to the network bridge. • Install Diag Head Emulator. • Install easy_DIS and the DIS programs. • Load DIS, open/run Diag Head and open IFHsrv32.exe.

• In DIS, enter Administration > Calibrating Touch Shield, change the processes to off and make sure it passes the API test. • Enter Administration > Diagnostic Head, click on the IP-address / computer-name and click the OK button. • Enter Administration > Connection Setup, click on the IP-address / computer-name and click Connecting. Once connected the IP-address should appear in the bottom right and both sets of lights are lit up. • Go back into Administration > Calibrating Touch Shield, set the vm process back to off and change translator to Fister.

• Edit ediabas.ini again, changing the interface to STD:OBD instead of ADS. • If you have access to more than one laptop, try installing DIS again on one of them, rather than wasting days on a problematic install.